3D Systems Cube

alaTest har samlat in och analyserat 14 tester för 3D Systems Cube. Det genomsnittliga betyget av denna produkt är 3.0/5, att jämföra med genomsnittsbetyget 4.0/5 för produkter i samma kategori. Designen och storleken uppskattas av många men pappershanteringen uppskattas inte lika mycket. Prestandan och prisvärdheten får blandade omdömen.

användarvänlighet, storlek, design, anslutningar

Tillförlitlighet, konstruktion, oljud, pappersmatning

Vi har analyserat betyg från experter och användare, produktens ålder och andra faktorer. Jämfört med andra produkter i samma kategori belönas 3D Systems Cube med en alaScore™ på 88/100 = Mycket bra kvalitet.

Testanalys

(Baserad på 14 recensioner)

Produkttester  

Användarrecensioner  

Betyg

  (14% av recensionerna)
Visa alla 5-stjärniga betyg   (29% av recensionerna)
Visa alla 4-stjärniga betyg   (29% av recensionerna)
Visa alla 3-stjärniga betyg   (7% av recensionerna)
Visa alla 2-stjärniga betyg   (21% av recensionerna)
Visa alla 1-stjärniga betyg

Funktioner

prisvärdhet
  Visa positiva (46%)Visa negativa (54%)(Visa alla)
användarvänlighet
  Visa positiva (65%)Visa negativa (35%)(Visa alla)
storlek
  Visa positiva (58%)Visa negativa (42%)(Visa alla)
tillförlitlighet
  Inga ännuVisa negativa (100%)(Visa alla)
prestanda
  Visa positiva (50%)Visa negativa (50%)(Visa alla)
konstruktion
  Visa positiva (33%)Visa negativa (67%)(Visa alla)
design
  Visa positiva (100%)Inga ännu(Visa alla)
oljud
  Inga ännuVisa negativa (100%)(Visa alla)
anslutningar
  Visa positiva (100%)Inga ännu(Visa alla)
pappersmatning
  Inga ännuVisa negativa (100%)(Visa alla)
visa alla

Visar 14 recensioner

Produkttester Användarrecensioner

Disclaimer:

Nedan är en lista med recensioner för denna och/eller liknande produkter. Om du tror att denna gruppering är fel kan du klicka här för att flagga.
Läs mer på vår FAQ sida.
Visar 1 - 10 av 14 Visa tester: på svenska | alla länder

Expertrecension från : Drew Prindle (digitaltrends.com)

3D Systems Cube 3D Printer review

 

The Cube 3 is one of the most feature-packed printers you can get for under $1,000, but its hit-or-miss performance can be frustrating.

Uber-simplified user experience ; Dual extruder ; Self-calibrating ; Wi-Fi connectivity ; Enclosed design ; Under $1,000

Buggy, frustrating software ; Lacks advanced user controls ; Expensive proprietary filament cartridges ; Noisy operation ; Non-heated bed occasionally causes misprints

That said, this it’s also one of the most feature-packed printer’s you’ll find for less than $1,000, so even with the occasional misprint, this machine gives you a ton of bang for your buck.

Aug 2015
Läs hela testet

Expertrecension från (cnet.com)

3D Systems Cube 3 ( White)

 

It's far from perfect, however. At times during my testing period, large print jobs failed half-way through the print cycle, and the printer takes a long time between jobs to cool down. The machine also uses 3D Systems' proprietary -- and expensive --...

The 3D Systems Cube 3 is well-designed and easy to use. The printer builds small objects excellently and is inexpensive for a printer that can print with two materials in the same job.

Printing large objects can randomly fail halfway through the process, and the printer needs to cool down after a job before it can print again. The machine uses 3D Systems' expensive proprietary filament cartridges.

If you don't mind sticking to small print jobs, the Cube 3 is as good as it gets for a compact 3D printer.

Feb 2015
Läs hela testet

Expertrecension från : Dong Ngo (cnet.com)

3D Systems Cube 3 review

 

The 3D Systems Cube 3 is one of the most compact dual-extruder 3D printers I've seen. The machine is well-designed and capable of calibrating on its own, which means it's ready to work right out of the box. It's also very easy to use and can print...

The 3D Systems Cube 3 is well-designed and easy to use. The printer builds small objects excellently and is inexpensive for a printer that can print with two materials in the same job.

Printing large objects can randomly fail halfway through the process, and the printer needs to cool down after a job before it can print again. The machine uses 3D Systems' expensive proprietary filament cartridges.

If you don't mind sticking to small print jobs, the Cube 3 is as good as it gets for a compact 3D printer.

Feb 2015
Läs hela testet

Expertrecension från : Rich Brown (cnet.com)

3D Systems Cube review review

 

MakerBot's Replicator 3D printer is difficult to master, but that difficulty is offset by its vibrant user community and its deeply tweakable software and hardware. The same can be said for cheaper 3D printers, which, like the Replicator, offer...

The 3D Systems Cube 's intuitive touch screen, Wi-Fi print features, and smart, removable build platform provide some conveniences you won't find in other 3D printers.

Underpowered software, overpriced printing material, and overly locked-down hardware hurt the Cube's appeal for general consumers and hobbyists alike.

3D Systems has some useful ideas in its Cube 3D printer, but it sacrifices too many features in the name of accessibility.

Okt 2012
Läs hela testet

Expertrecension från : Dong Ngo (cnet.com.au)

3D Systems Cube 3 3D printer review: An excellent compact printer for making smaller objects

 

The 3D Systems Cube 3 is one of the most compact dual-extruder 3D printers I've seen. The machine is well-designed and capable of calibrating on its own, which means it's ready to work right out of the box. It's also very easy to use and can print...

The 3D Systems Cube 3 is well-designed and easy to use. The printer builds small objects excellently and is inexpensive for a printer that can print with two materials in the same job

Printing large objects can randomly fail halfway through the process, and the printer needs to cool down after a job before it can print again. The machine uses 3D Systems' expensive proprietary filament cartridges

If you don't mind sticking to small print jobs, the Cube 3 is as good as it gets for a compact 3D printer.

Feb 2015
Läs hela testet

Användarrecension (cnet.com)

"Finally, a 3D printer I can use out of the box..."

 

I recently acquired a 3D Systems Cube printer for some work projects. We had talked about getting into 3D printing but had run into trouble selecting which direction. Reprap, Makerbot, and all the other 'DIY' printers seemed more like a hobby than a...

*Almost Ink Jet simplicity

*Cost ($1299 is about twice where it needs to be for mainstream)

Feb 2013
Läs hela testet

Användarrecension (cnet.com)

"Poor print quality."

 

Looks like a Fisher-Price toy and and unfortunately... functions like one. While the competitors in this price bracket may not be as pleasing to the eye, they surpass the quality of output by far when compared to this offering from 3D Systems. Since...

Aesthetically pleasing form factor, low cost of purchase.

Poor z-layer resolution, use of a hot plate to compensate for poor heat nozzle implementation. All parts and materials are proprietary, translating to high cost of ownership compared to similarly priced offerings in this industry segment.

Okt 2012
Läs hela testet

Användarrecension (newegg.com)

Junk

 

Buy something else, anything else. Maybe a makerbot?

Software easy to use, low cost

Only has 90 warranty and this thing will break, the limit switches in this thing are junk and fail all the time. I've already had the unit replaced once and now the limit switches are failing outside of warranty. I've only had it 6 months and it's...

Jan 2015
Läs hela testet

Användarrecension (newegg.com)

Junk

 

Buy something else, anything else. Maybe a makerbot?

Software easy to use, low cost

Only has 90 warranty and this thing will break, the limit switches in this thing are junk and fail all the time. I've already had the unit replaced once and now the limit switches are failing outside of warranty. I've only had it 6 months and it's...

Jan 2015
Läs hela testet

Användarrecension (newegg.com)

3-D Printer

 

Makes an excellent product for it's size.

Filament breaks and jambs print head. I have to disassemble head to clean out. Software is hard to unzip and load after downloading.

Okt 2014
Läs hela testet
1
2

Prisjämförelse för 3D Systems Cube

Inga priser funna för denna produkt